1. From the taskbar, select Start. In the menu that appears, select Settings, then Printers.

2. In the Printers window, click the Phaser 360 printer icon with the right mouse button, then select Properties from the menu.

3. Click the following tabs to see printing options; refer to your Windows 95 documentation for more information on tabs and options.

• Set the Timeout settings if your printer is connected to a local port.

  Not Selected: Type a value in this text box to change the number of seconds Windows waits before notifying you that a printer is off-line. The default is 15 seconds and is recommended.

  Transmission Retry: On large or multiple-page documents, you may see an Alert message that the printer is no longer accepting data before the job is completely sent to the printer. To avoid this Alert message, set this option to a larger value, such as 900 seconds (15 minutes).

Graphics tab

• To change the print-quality modes (resolution or dpi settings), use the Print Quality selections in the Device Options tab. The Print Quality selections override the Resolution options in the Graphics tab.

• If you are using host color correction, you need to make selections in both the Graphics and Device Options tabs. Refer to Color Matching for more information on host color correction.

• In the Printer features scroll list, select options such as Color Corrections. In the next field, select the Color Correction you want, such as Automatic.

• In the Installable Options scroll list, select options such as the Optional Lower Tray or Optional Hard Drive.

• Under PostScript timeout values, make these selections:
  • Leave the Job Timeout set to 0.

  • Set the Wait Timeout to a high value, such as 900 seconds (15 minutes) to make sure you do not lose a multipage job due to a timeout after the Transmission Retry Alert message is displayed.

• The PostScript header contains important PostScript information that must accompany each print job; it is not a banner page printed with each job. If an option is not selected, an error message is displayed on your computer screen and your job does not print. Click one of the following in the PostScript header field:

  Select Download header with each print job. This option downloads PostScript header information with each print job. This is the recommended setting.

  Click the Send Header Now button to save the PostScript header information in the printer, then select the Assume header is downloaded and retained option. This option makes print files a little smaller and faster than the first option, but you need to click the Send Header Now button every time the printer is turned on.

• Click the Advanced button to see more options.
  • For PostScript language level, select 3. Click OK when finished.

    ---

    Note: For faster printing, select Binary communications protocol under Data format.

    ---