Phaser 360

Printing color sampler charts from the front panel Decide which color correction you need to use; see Important preparations for details. Select a color correction from the printer's front panel using the TekColor Correction menu. When the printer is on and the Ready/Printer Name message appears, press the Menu button. The printer displays the following message: Help Pages <---- ----> Menu Using the left (<----) or right (---->) arrow buttons, scroll through the selections until the following message appears: TekColor Correction <---- ----> Menu Press the Menu button to access color correction selections. The printer displays the following message: TekColor:None * <---- ----> OK where the asterisk (*) indicates the current selection. Using the left or right arrow buttons, scroll through the selections until you reach the appropriate setting. Press the OK button to confirm your selection. Return to the top level of the menu by pressing the Exit button until the printer displays the Ready/Printer Name message. Print a color sampler chart from the printer's front panel using the Help Pages menu. When the printer is on and the Ready/Printer Name message appears, press the Menu button. The printer displays the following message: Help Pages <---- ----> Menu Press the Menu button to access the Help Pages. The printer displays the following message: Menu Map <---- ----> Print Using the left (<----) or right (---->) arrow buttons, scroll to RGB Color Sampler or CMYK Color Sampler. Press the Print button to print the displayed sampler. Select colors within an application using the colors on the chart. Print your document using one of the following methods: If you are printing from a supported driver: Print your document using a supported printer driver with the same color correction option selected in the driver that you used on the front panel to print the chart. Any other color correction selection in the driver can cause the colors to print differently. If you are not using a supported driver: Print your document with the same front panel color correction you used to print the chart. Any other color correction selection can cause the colors to print differently. Return to Phaser 360 Topic List						Support Home Page Phaser 360 Support Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program