This driver software is available only on the printer's CD-ROM.

---

Note: During installation, the LaserWriter 8.3.4 driver leaves other versions of the LaserWriter driver (such as 7.x and 6.x) intact, but overwrites an earlier version of the LaserWriter 8 driver, if one exists.

---

1. Install the printer's software as described at Using the Macintosh Installer. Choose Custom Install, then select LaserWriter 8.3.4 Driver and Printer Descriptions.

2. Install the driver:
   1. In the PhaserTools folder on your hard disk, locate the alias to the LaserWriter 8.3.4 Installer.

   2. Double-click on the alias to open the installer application on the printer's CD-ROM

   3. Follow the on-screen instructions to install the driver.

3. Open the Chooser.

4. Select the LaserWriter 8 driver icon.

5. Click on the Zone your printer is in. See your network administrator if you have questions.

6. Select your printer from the list.

7. Still in the Chooser, click the Setup button to see a list of options.

8. The correct PPD file should be selected automatically.

   If the PPD file is not automatically selected, a dialog box opens showing the location of the PPD files you have installed in the Printer Descriptions folder, in the Extensions folder, inside your System Folder. Click one of the following PPDs and click Select:

   • Use TK350171.PPD with the standard version of the printer.

   • Use TK350691.PPD with the printer's Extended Features option.

     ---

     Note: If you are not sure which configuration of the printer you have, the printer's startup page lists this information under Extended Features: Yes/No. See Printing Help Pages from the front panel for instructions on printing a copy of the printer's startup page.

     ---

9. In the dialog box that appears, select the appropriate items under Installable Options then click OK.

10. Click the Chooser's close box