Macintosh file name	PC file name
Setscreen On Setscreen Off and Apple Printer Utility	SCRENON.PS SCRENOFF.PS

Macintosh users

1. Refer to Using the Macintosh Installer for instructions on installing the utility files from the Phaser 350 printer's CD-ROM.

2. Select the appropriate printer in the Chooser.

3. Locate the Apple Printer Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.

4. Choose Download PostScript File from the Utilities menu.

5. Select either the Setscreen On or the Setscreen Off file from the list, then click Open. (These files were installed in the Printer Utilities folder, inside the PhaserTools folder.)

6. At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name. Click Save to send the file to the printer.

7. If no output is returned by the printer, the Apple Printer Utility displays a dialog box; click OK continue.

1. Locate the utility files in the PHSR350 directory on the printer's CD-ROM.

2. Copy the files that you need to your hard disk or use them directly from the CD-ROM.

3. Use one of the following methods to send the SCRENON.PS or the SCRENOFF.PS file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer (Windows 3.1 users can also use the Copy command in the File Manager)

   • Workstation users: Send the file to the printer as you would any PostScript file.