---

Note: There are different ways to improve print speed, such as by upgrading to Ethernet. For more information, request a document catalog from HAL or EuroHAL, the Tektronix automated fax systems. Refer to Using the automated fax systems for instructions.

---

All users

• When you use any color correction option (other than None), your printer can take longer to process bitmapped images. Select color corrections from the supported drivers, with downloadable utility files, or from the printer's front panel; see Color correction descriptions for more information.

• The Fast Color print-quality mode is the fastest print-quality mode, followed by the Standard print-quality mode and the Enhanced (600 x 300) mode. Select print-quality modes from the supported drivers, with downloadable utility files, or from the printer's front panel; see Print-quality modes for more information.

• If you are using Adobe PhotoShop, you can print using the Tektronix PhaserPrint software plug-in to improve the image data transfer time from your Macintosh to the printer. Refer to the Phaser 350 On-line Reference Guide for instructions on installing and using the plug-in.

---

Note: Only use the following procedure if your computer is connected to the printer through the parallel port or the optional serial port.

---

1. From the Control Panel, double-click Printers.

2. In the Printers dialog box, select the Tektronix Phaser 350 printer, then click Setup. A dialog box appears with the printer's name across the top.

3. Click the PostScript tab.

4. In the Performance Options field, select the Use PostScript Level 2 Features option.

5. Click the Job Control tab.

6. For better performance, select the Binary Mode option.

7. From your application, choose the Tektronix Phaser 350 as your printer.

8. Try printing the document again.

1. Click the Start icon in the taskbar on your screen; a menu appears.

2. Move the cursor over Settings; another menu appears.

3. In the menu, click Printers; the Printers window appears.

4. In the Printers window, select the Phaser 350 printer icon, then select Properties from the File menu.

5. Click the PostScript tab, then click the Advanced button.

6. Select Use PostScript Level 2 features.

7. Select Binary communications protocol under Data format.

8. Click OK when finished.

9. Try printing the document again.