Front panel messages
|
Message
|
Explanation/Action
|
|---|
|
<printer network name>
|
No user action required. The printer is ready to print.
|
|
Busy < message >
|
No user action required.
|
|
Check Print
|
The printer is waiting for confirmation of the print job from the front panel.
|
|
Cleaning
|
No user action required. The printer is running an automatic cleaning operation. The maintenance tray (B) is locked during printhead cleaning operations.
|
|
Clearing Job
|
No user action required. May be displayed after you press the Cancel button.
|
|
Close Front Cover
|
Close the front cover.
|
|
Close Top Cover
|
Close the top cover.
|
|
Close Exit Cover
|
Close the exit cover.
|
Cooling Down
Cooling Complete
Lock transit Restraint
Ready For Power Off
|
"Cool Down For Power Off" was selected from the front panel and the printer is running a cool-down process.
|
|
Energy Star Mode
|
Press Wakeup, open a cover or send a print job to bring the printer to Ready.
|
Empty Waste
Liner (A)
|
The waste liner (A) in the printer's maintenance tray (B) is full. Open the front cover, remove the maintenance tray and empty the blue waste liner.
|
|
Fault. Service Required
|
Turn the printer off, wait at least 15 seconds and turn the printer's power on again. If the failure persists, note the code number in the display. In the U.S., call Tektronix service at 1-800-835-6100. Outside the U.S., contact your local Tektronix office.
|
|
Incorrect Media Size
|
The paper fed into the printer was shorter than that specified.
|
|
Ink Low/Out of Ink
|
The Ink Low message appears when ink level drops to one-half stick. Open the top cover and add the appropriate color of ColorStix solid ink stick.
|
|
Initializing
|
No user action required. Wait for a period of time.
|
|
Install New Tray (B)
|
Maintenance tray (B) is empty. Open the front cover, remove the maintenance tray and replace it with a new maintenance tray.
|
|
Jam At Exit Tray
|
Open the front cover, press the exit cover release button and remove the jammed paper.
|
|
Jam:Open Front Cover
|
Open the front cover and remove the paper jam from the manual-feed slot or behind the front cover.
|
|
Jam:Open Exit Cover
|
Open the exit cover and remove the paper jam.
|
Jam:Remove Upper Tray
Jam:Remove Media Tray
|
There is a paper jam at the upper media tray as opposed to the lower paper tray. Remove the upper tray and the jammed media.
|
|
Jam:Remove Lower Tray
|
There is a paper jam at the lower paper tray as opposed to the upper media tray. Remove the lower paper tray and the jammed paper.
|
|
Jam:Retry Manual Feed
|
Remove the media from the manual-feed slot and re-insert it.
|
|
Job Cancelled
|
No user action required. Displayed after you press the Cancel button.
|
|
Load xx Media
|
The printer is attempting to clean an image off of the printer drum but requires a larger sheet of paper to do so. Load the tray with several sheets of paper; the correct size is indicated by xx.
|
|
Lower Media Tray Empty
|
Add paper to the lower paper tray.
|
|
Tray (B) Locked
|
The printer has locked the maintenance tray (B) during a printhead cleaning operation. Wait for a few minutes before trying to remove the maintenance tray.
|
|
Tray (B) Low
|
The Tray (B) Low message appears when the maintenance tray is nearly empty. Open the front cover, remove the maintenance tray (B), and replace it with a new one.
|
|
Manual Feed Paper
|
The printer requires a sheet of paper for cleaning but the media tray contains transparency. Feed a sheet of paper into the manual-feed slot.
|
|
Media Tray Empty
|
Add paper or transparencies to the media tray.
|
|
Melting Ink
|
No user action required. Displayed during print jobs that require large amounts of ink.
|
|
Power Switch Is Off
|
The printer's rear-panel switch has been turned off.
|
|
Processing Data
|
No user action required.
|
|
Ready
|
No user action required. The printer is ready to print.
|
|
Replace Lower Paper Tray
|
Insert the lower paper tray.
|
|
Replace Media Tray
Replace Upper Media Tray
|
Insert the standard media tray.
|
|
Standby
|
Press Wakeup or send a print job to bring the printer
to Ready.
|
|
Tektronix V:<n.n>
|
No user action required. Wait for a period of time.
|
|
Unlock Transit Restraint
|
Unlock the transit restraint on the right side of the printer before sending print jobs.
|
|
Upper Media Tray Empty
|
Add paper or transparencies to the standard media tray.
|
|
Waiting For Manual Feed
|
Insert paper or transparency in the manual-feed slot.
|
|
Waiting For Paper
|
The print job specifies paper but the printer detects that the transparency tray is installed. Load paper in the media tray and press OK.
Check that the media selector switch on the side of the tray is set for Paper.
|
|
Waiting For Transparency
|
The print job specifies transparency but the printer detects that the paper tray is installed. Load transparency in the media tray and press OK.
Check that the media selector switch on the side of the tray is set for Transparency.
|
|
Warming Up
|
No user action required. Wait for a period of time.
|
|
Waste Liner (A) Full
|
Open the front cover, remove the maintenance tray (B) and empty the waste liner (A).
|
