Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

PhaserShare


PhaserShare FTP interface
The PhaserShare FTP interface is a standard FTP server. Using FTP, you can send a job to the printer, where it is printed (not stored). No password is required. You can save a PostScript file from an application and send the file to a remote printer over a network or the internet using an FTP program, NetScape 2.0, or any browser that supports sending a file via FTP.


Note: FTP is not available on the following printers: Phaser 340, Phaser 550, and Phaser 540.
The printer's FTP directory is /print, and any files sent there are automatically passed to the printer. Inactive data connections are timed out after 1 minute; inactive sessions are timed out after 15 minutes.

The printer's FTP parameters can be changed using PhaserLink software (see View and Configure Interface Settings).

Example FTP session

The following example illustrates a simple FTP session with the printer. In this example, the session is opened with the ftp command, followed by the printer's IP address. The put command is used to send the file sample-file.ps to the printer. The bye command terminates the connection.

ftp 134.67.66.11
> put sample-file.ps
> bye

The following table lists the supported FTP commands.

Request Description
ABOR

Abort previous command.

HELP

Give help information.

MODE

Specify data transfer mode.

NOTE: With the PhaserShare FTP interface, the only transfer mode is Stream.

NOOP

Do nothing.

PASS

Specify password.

PORT

Specify data connection port.

PUT

Send a file to the printer.

PWD

Print the current working directory.

QUIT

Terminate session.

STAT

Report current status.

NOTE: With the PhaserShare FTP interface, optional arguments to this command are ignored.

STOR

Store a file.

STRU

Specify a data transfer structure.

NOTE: With the PhaserShare FTP interface, only File and Record structures are allowed; the default is File.

SYST

Specify operating system of server.

TYPE

Specify data transfer type.

NOTE: With the PhaserShare FTP interface, only ASCII Non-printing and Image types are allowed; the default is ASCII Non-printing.

USER

Specify user name.

Support Home Page
Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program