After the video loads, click to start the video.    Back to Video List

The printer displays a message when you need to install a new Fuser Roll Cartridge.

1. Open the fuser drawer on the left side of the printer. When removing the cartridge, be careful of hot surfaces.

2. Lift the fuser roll cartridge by the blue handle. Don't touch the white surface. Place the used cartridge into a plastic bag and discard it as normal office waste.

3. Remove the white plastic cover on the new fuser roller, and pull out the pins on either end.

4. Insert the new fuser roll cartridge into the fuser assembly by aligning the arrows and snap both ends firmly into to place.

5. Close the drawer.