|
Phaser 840 Intelligent Ready
|
|
Intelligent Ready is an automated system that monitors the Phaser 840 printer's usage and warms up the printer when you are most likely to need it. You can turn Intelligent Ready on or off from the printer's front panel. Using PhaserLink Printer Management Software, you can control when the printer automatically warm s up.
Enabling
and disabling Intelligent Ready from the front panel
-
In the front panel, scroll to
Menu; press
Select.
-
Scroll to
Printer Configuration; press
Select.
-
Scroll to
Default Printer Settings; press
Select.
-
Scroll to
Advanced Printer Settings; press
Select.
-
Scroll to
Intelligent Ready. Press
Select
to turn this option on or off.
-
Scroll to
Exit; press
Select
to return to the
Ready to Print
message.
Setting up
Intelligent Ready using PhaserLink Printer Management Software
-
On any PhaserLink page, click
Configuration. This displays the
View and Configure Settings
page.
-
From the
View and Configure Settings
page, click
View and Configure Intelligent Ready Settings. This displays the
View and Configure Intelligent Ready Settings
page.
-
Select a
Warmup Mode:
-
Intelligent. In this mode, the printer monitors usage patterns and warms up automatically when you are most likely to need it.
-
Scheduled. This mode allows you to specify a warmup time for each day of the week. If you select this mode, use the
Sunday
through
Saturday
fields to select warmup times.
-
Job Activated.
In this mode, the printer warms up when it receives a print job.
-
If a validation password has been assigned, enter the password to make the change to take effect.
|
NOTE
PhaserLink passwords are not encrypted.
|
-
Click
Do/Apply.
Return to Topic List
|
| |
|
