Phaser 780

Setting IP parameters: Phaser 840 printer front panel When the front panel displays READY TO PRINT, press the down arrow button until Menu is highlighted. Press Select. Press the down arrow button until Printer Configuration is highlighted. Press Select. Press the down arrow button until Network Settings is highlighted. Press Select. Press the down arrow button until TCP/IP is highlighted. Press Select. Set the IP address: Press the down arrow button until IP Address is highlighted. Press Select. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers. When the address is set, press Select. Set the network mask: Press the down arrow button until NW Mask is highlighted. Press Select. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers. When the address is set, press Select. Set the default router/gateway address: Press the down arrow button until Default Router/Gateway Address is highlighted. Press Select. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers. When the address is set, press Select. To return the printer to normal operation, press the down arrow button until Exit is highlighted. Press Select. Return to Topic List						Support Home Page Phaser 780 Support Page Xerox Office Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program