|
Finding
the printer's name in the Chooser
|
-
From the
Apple
menu, select
Chooser.
-
In the upper-left corner of the
Chooser, find the driver icon. (If the driver icon does not appear in the
Chooser, install the printer driver.) Click the driver icon.
-
If a list of zones appears in the lower-left portion of the
Chooser, select the proper zone.
|
NOTE
The printer's default zone is listed on the Configuration Page in the EtherTalk or TokenTalk field. For more information on the Configuration Page, see
The printer's Configuration Page.
|
-
A list of printers appears in the right portion of the
Chooser; find your printer's name in the list. The printer's default name is listed on the Configuration Page (see
The printer's Configuration Page
). If the name does not appear, check the cable connection between your printer and the network.
|
NOTE
It is possible for the
Printer Name
field on the Configuration Page to be blank. When the printer is powered up, it uses a default name and then checks to see that no other printer on the network has the same name. If enough printers with the same default name are present it can take several minutes for the printer to establish a unique name. If the name field is blank, wait a short time and reprint the Configuration Page.
|
Return to Topic List
|
| |
|
