Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Phaser 780


Using the front panel Copier Menu

The printer allows you to control the settings listed in the table below. From the printer's Help Pages menu, select Menu Map to print a Copier Menu.

Copier menu setting
Purpose

Number of Copies/Print

Selects up to 999 copies. To change the desired number, press the right or left arrow button.

Press down and hold the arrow button to autoincrement the value. Release the button when the desired number of copies is displayed.

Color Mode

 

Selects the type of color reproduction from the following:

  • Color Image: For full-color images. The image is reproduced with as accurate as possible color matching.
  • Color Text: For images with colored text, line art or charts. The image is reproduced in full color, but text colors are accentuated and scanning occurs at a higher resolution to maintain text definition.
  • Gray Scale: For copying or creating monochrome images. The image is reproduced in shades of gray.
  • Black and White: The image is reproduced in full white and full black only. Especially suitable for copying line drawings.

Adjust Color

  • Brightens or increases the saturation of all colors or reduces the saturation (add black) on a scale of -10 (blackest) to +10 (most saturated, brightest). Zero, the default, is neutral.
  • Adjusts the red/green and blue/yellow color balance.

Adjust Contrast

Adjusts the contrast on a scale of -10 (lowest contrast) to +10 (highest contrast).

Adjust Darkness

 

Lightens or darkens your prints on a scale of -10 (lightest) to +10 (darkest).

Zoom

Enlarges or reduces the size of the copy image from approximately 25% to 1000% of the original's image size, depending on your scanner. The default setting is 100%. To change the scale value, press the right or left arrow button.

Press down and hold the right or left arrow button to autoincrement the value. Release the button when the desired number of copies is displayed.

Scan Area

 

Selects the size of your original image or input.

  • The options available (for example, Letter, Legal, Tabloid, A3) will depend on the scan area of your scanner.
  • Tray Size, the default selection, copies an area equal to the size of the media in the selected tray. If the media in the tray is larger than the area the scanner can image, it will scan the largest possible area and scale the image up to fit the media, without distortion.

Scan Tray

 

Selects the media tray from which your copy or output will be printed.

  • The options available will depend on the number of media trays in your printer.

Set Defaults

  • Changes the printer's front panel default settings and saves your own settings for the kinds of copies you typically make.
  • Resets the defaults to the printer's original selections.

Copier Menu

 


Return to Topic List

Support Home Page
Phaser 780 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program