You can choose to have a Startup Page print each time the printer is turned on or reset, or you can disable the Startup Page. There are three methods for enabling/disabling the Startup Page:

• From PhaserLink Printer Management software. Refer to the PhaserShare Networking Manual for information on using your web browser to access the printer.
• From utility files. Download one of the following files from the printer's CD-ROM:
• Macintosh Use the Apple Printer Utility. See Using the Apple Printer Utility to perform other tasks for instructions.
• PC Use utility files STARTPG.PS (enables), NOSTRTPG.PS (disables); see Downloading files from a PC for downloading instructions.
• From the printer's front panel
1. Press Select; the printer displays the following message:

Printer Menu Help Pages Menu

2. Press the right arrow button to scroll to Printer Defaults.
3. Press Menu.
4. Press the right arrow button until the following message appears:

Printer Defaults Startup Page Menu

5. Press Menu; the following status message appears, where the asterisk indicates the current setting:

Startup Page *On Select

6. Press the right arrow button once. Then press Select to change the default setting to Off.
7. Press Exit (the far right button) until Ready appears.