|
Installing additional
memory
|
Static electricity precautions
-
Leave the printer plugged into its power outlet; this preserves a ground path for static discharges.
-
Touch the printer's bare metal frame often to discharge static electricity from your body or use a grounding strap if available.
-
Handle the circuit board(s) by their edges only.
-
Do not lay the board(s) on a metal surface.
-
Avoid wearing nylon or polyester clothing; they generate static electricity.
On-site installation
Professional, on-site installation is just a phone call away. Productivity is important to your business success -- so when you need it done right -- the first time -- call Xerox Office. Xerox Office' on-site installation delivers what you've been looking for: expert service technicians who provide quality, on-site product installation. See
Customer Support Centers
for more information.
CAUTION
Do not install this RAM DIMM if you are uncomfortable modifying electronic equipment. You will be liable for any damage to the printer.
Requirements
-
A Phillips
®
head screwdriver
-
A 168-pin, low-voltage, 64-bit wide SDRAM DIMM. You can add 16-Mbyte, 32-Mbyte, 64-Mbyte, and 128-Mbyte DIMMs that have Serial Presence Detect (SPD) ROMs. The following memory cards are compatible with your printer.
|
Samsung
|
Memory
|
Configuration
|
|
KMM366S203BT
|
16 Mbyte
|
1 DIMM bank of 2M x 8 devices
|
|
KMM366S403BT
|
32 Mbyte
|
2 DIMM banks of 2M x 8 devices
|
|
KMM366S823AT
|
64 Mbyte
|
1 DIMM bank of 8M x 8 devices
|
|
KMM366S824AT
|
64 Mbyte
|
2 DIMM banks of 4M x 16 devices
|
|
KMM366S1623AT
|
128 Mbyte
|
2 DIMM banks of 8M x 8 devices
|
|
Smart Module
|
|
|
|
SM564043574N6AA
|
32 Mbyte
|
1 DIMM bank of 4M x 16 devices
|
|
SM564088574N6AA
|
64 Mbyte
|
1 DIMM bank of 8M x 8 devices
|
|
Micron Technology
|
|
|
|
MT8LSDT264AG-66CL2
|
16 Mbyte
|
1 DIMM bank of 2M x 8 devices
|
|
MT16LSDT464AG-10BC4
|
32 Mbyte
|
2 DIMM banks of 2M x 8 devices
|
|
MT16LSDT464AG-662C1
|
32 Mbyte
|
2 DIMM banks of 2M x 8 devices
|
|
MT8LSDT864AG-662D3
|
64 Mbyte
|
1 DIMM bank of 8M x 8 devices
|
|
MT8LSDT864AG-10BD2
|
64 Mbyte
|
1 DIMM bank of 8M x 8 devices
|
|
MT16LSDT1664AG-662DT
|
128 Mbyte
|
2 DIMM banks of 8M x 8 devices
|
|
NEC
|
|
|
|
MC-454AD645F-A10B
|
32 Mbyte
|
2 DIMM banks of 2M x 8 devices
|
|
MC-458CB645FA-A10B
|
64 Mbyte
|
1 DIMM bank of 8M x 8 devices
|
|
MC-4516CD645FA-A10B
|
128 Mbyte
|
2 DIMM banks of 8M x 8 devices
|
Installing a memory card
-
Turn off the printer, but do not unplug it.
-
Open the front cover.
-
Pull out the multi-purpose tray unit on the bottom right of the printer.
-
Remove the two screws on the panel above the multi-purpose tray. Take off the panel and set it aside.
-
Press open the white tabs at the top and bottom of the memory slot. Install additional memory starting from the slot on the right and proceeding to the left.
-
Hold the memory card by the edges with the
notched
long edge toward the printer.
-
Insert the card into the slot, aligning the notches with the ridges in the slot. Press firmly. The white tabs will snap into place, locking the card in the slot.
-
Screw the right panel back into place.
-
Close the multi-purpose tray unit and the front cover.
-
Turn on the printer.
-
To verify that the printer recognizes the new memory board, print a Configuration Page from the printer's front panel Help Pages menu.
Return to Topic List
|
| |
|
