View
and Configure NetWare IPX Frame Types (Phaser 840, 740, 780, and 360 only)
|
This page allows you to view and configure the following NetWare IPX frame types:
Ethernet frame types:
-
Ethernet 802.2 (IEEE packet type with MAC header followed by 802.2 LLC header)
-
Ethernet SNAP (IEEE packet type with MAC header followed by 802.2 LLC header and SNAP header)
-
Ethernet 802.3 (early Novell NetWare packet type)
-
Ethernet II (DEC/Intel/Xerox Specification Version 2 packet type)
Token Ring frame type:
-
Token Ring (IEEE Token Ring 802.5)
-
Token Ring_SNAP (IEEE Token Ring 802.5-SNAP)
You can disable any frame types. You can enable any and or all frame types, but at least one must be enabled. The
Network Number
field reports the last power-up value of the Network Number bound to that frame type. If a frame type is disabled at power-up, the
Network Number
is displayed as
Not Bound.
Return to PhaserLink Help Home Page
|
| |
|