|
Setting up your printer on a TCP/IP network
|
Phaser 740 and 780 printers
TCP/IP
Windows NT platforms
This is the procedure for installing your Xerox color printer on a TCP/IP network using Windows NT. Click the links below to obtain detailed instructions on each step. After completing each step, use your browser's back button to return to this page.
- If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now. If you are using the printer's built-in network interface, skip this step.
- Connect the printer to the network (click the type of interface you are using):
- Print a configuration page.
- Set the printer's IP addressing parameters.
- Add the driver and perform the setup for your Windows NT environment:
This completes the configuration.
Problems? See Windows NT network troubleshooting.
Return to Quick Network Setup Instructions
Return to Topic List
|
|
| |
|
