Manual Duplex Printing: Multi-Purpose Tray
|
Side 1
For a multi-page document, print
odd-numbered pages for Side 1. (This selection is application-specific).
-
Insert paper with the
side to be printed
face-up. This example shows letterhead paper.
-
In the printer's front panel, select the media type at the prompt.
Front panel selection
|
Media type
|
Paper:
|
Standard laser paper 90 - 105 g/m2, 24 - 28 lb.
|
Coated Paper:
|
Xerox Glossy Coated paper
|
Card or Envelope:
|
Card stock
|
Heavy laser paper 109 - 150 g/m2, 29 - 40 lb.
|
-
In the
Print
screen (using a supported driver), select
Multi-Purpose Tray
as the Paper Source or Tray Selection. Send the job to the printer.
-
Remove the printed paper from the output tray.
Two-sided printing on specialty media can shorten component life.
For best results with duplex printing, use 90 g/m2 (24 lb.) laser paper.
Side 2
For a multi-page document, print
even-numbered pages for Side 2. (This selection is application-specific).
-
Insert the paper with the
blank side
face-up.
-
In the printer's front panel, select the media type at the prompt.
Front panel selection
|
Media type
|
Paper 2nd Side:
|
Standard laser paper 90 - 105 g/m2, 24 - 28 lb.
|
Coated Paper:
|
Xerox Glossy Coated paper
|
Card or Envelope:
|
Card stock
|
Heavy laser paper 109 - 150 g/m2, 29 - 40 lb.
|
-
In the
Print
screen (using a supported driver), select
Multi-Purpose Tray
as the Paper Source or Tray Selection. Send the job to the printer.
-
Remove the printed paper from the output tray.
Return to Topic List
|
| |
|