|
The printer's
networking software
|
Networking software: Phaser 740, 780, and 360 printers
The printer is shipped with a software CD-ROM, which contains software that you may need to install your printer on a network. The CD-ROM also contains on-line documentation, printer drivers, and other printer software. A single integrated installer is used to install printer drivers and other software.
Obtaining networking software for Phaser 740 and Phaser 780 printers
You obtain the networking software from the CD-ROM by running the installer:
-
Put the printer's software CD-ROM into the CD-ROM drive.
-
If the Windows autorun feature is enabled, the CD-ROM launches automatically.
-
If the Windows autorun feature is disabled, double-click
My Computer, then double click the CD icon to launch the CD-ROM.
-
View the brief introductory information, then click
Install Drivers
to launch the installer.
-
When you are prompted to select
Easy Install
or
Custom Install, select
Custom Install.
-
In the
Custom Install
dialog box, check the box for
Network Utilities.
-
If you are running the installer on a computer that has NetWare software installed, you can also check the boxes to install the PhaserShare Administrator software. For more information on the PhaserShare Administrator software, see
PhaserShare Administrator Software for NetWare Networks.
-
To complete the installation, follow the on-screen prompts.
Obtaining networking software for Phaser 360 printers
You obtain the networking software from the CD-ROM by running the installer:
-
Locate and run the installer on the printer's CD-ROM. On a PC, the file is
SETUP.EXE; on a Macintosh, it is
Phaser 360 Installer.
-
When you are prompted to select Easy Install or Custom Install, select Custom Install.
-
In the
Custom Install
dialog box, check the box for
Network Utilities.
-
If you are running the installer on a computer that has NetWare software installed, you can also check the boxes to install the PhaserShare Administrator software. For more information on the PhaserShare Administrator software, see
PhaserShare Administrator Software for NetWare Networks.
-
To complete the installation, follow the on-screen prompts.
Network administration software
The following table lists the network administration software according to environment (network protocol, platform, and printer).
Network administration software
|
Environment
|
Software
|
|
NetWare; Windows 95, Windows NT, and Windows 3.1
|
Network queue configuration:
PhaserShare Administrator (Novell PCONSOLE and NWAdmin can also be used.)
Printer configuration:
PhaserShare Administrator (Over TCP/IP, PhaserLink software can also be used; Novell's PCONSOLE and NWAdmin cannot configure the PhaserShare network interface.)
Printer status monitoring:
Windows Print Monitor (over TCP/IP, PhaserLink software can also be used; PhaserLink software provides status on additional Xerox printer features.)
|
|
TCP/IP; Windows 95 and Windows 3.1
|
Printer configuration:
PhaserLink software
Printer status monitoring:
PhaserLink software
|
|
TCP/IP; Windows NT
|
Printer configuration:
PhaserLink software (PhaserLink software does not set up queues on the print server.)
Printer status monitoring:
PhaserLink software
|
|
AppleTalk; Macintosh 7.x and 8.x
|
Printer configuration:
PhaserLink software (MacTCP or Open Transport required)
Printer status monitoring:
PhaserLink software (MacTCP or Open Transport required)
|
|
TCP/IP; UNIX
|
Printer configuration:
PhaserLink software (If using PhaserPrint for UNIX for printing, use PhaserPrint to set up print queues.)
Printer status monitoring:
PhaserLink software
|
Return to Topic List
|
| |
|
