# of Copies

Selects up to 999 copies. To change the desired number, press <--- or --->.

Press down and hold <--- or ---> to auto-increment the value. Release the button when the desired number of copies is displayed.

Color Mode

Selects the type of color reproduction from the following:

• Color Image: For full-color images. The image is reproduced with as accurate as possible color matching.
• Color Text: For images with colored text, line art or charts. The image is reproduced in full color, but text colors are accentuated and scanning occurs at a higher resolution to maintain text definition.
• Gray Scale: For copying or creating monochrome images. The image is reproduced in shades of gray.
• Black and White: The image is reproduced in full white and full black only. Especially suitable for copying line drawings.

Lighten/Darken

Lightens or darkens your prints on a scale of -10 (lightest) to +10 (darkest).

Color Saturation

Brightens or increases the saturation of all colors or reduces the saturation (add black) on a scale of -10 (blackest) to +10 (most saturated, brightest). Zero, the default, is neutral.

Zoom

Enlarges or reduces the size of the copy image from approximately 25% to 1000% of the original's image size, depending on your scanner. The default setting is 100%. To change the scale value, press <--- or --->.

Press down and hold <--- or ---> to auto-increment the value. Release the button when the desired number of copies is displayed.

For additional information on using the scaling function to enlarge and reduce copies, refer to Placing and scaling images.

Scan Area

Selects the size of your original image or input.

• The options available (for example, Letter, Legal, Tabloid, A3) will depend on the scan area of your scanner.
• Tray Size, the default selection, copies an area equal to the size of the media in the selected tray. If the media in the tray is larger than the area the scanner can image, it will scan the largest possible area and scale the image up to fit the media, without distortion.

Select Tray

Selects the media tray from which your copy or output will be printed.

• The options available will depend on the number of media trays in your printer.

Save Default

• Changes the printer's copier menu default settings and saves your own settings for the kinds of copies you typically make.

Reset Factory Defaults

• Sets the defaults to the printer's original selections.