Ugrás a fő tartalomraAz Akadálymentességi szabályzat megtekintéséhez kattintson ide, illetve az akadálymentességgel kapcsolatos kérdéseivel forduljon hozzánk bizalommal.
Phaser 560


Specifications
Temperature
Operating: 10o C to 32.5o C (50o F to 90.5o F)
Best Print Quality: 15º C to 25º C (59º F to 77º F)
Non-operating: 0o C to 40o C (32o F to 104o F)
Storage: (without paper, transparencies, or consumables): -20o C to +60o C
(-4o F to +140o F)

Humidity
Operating: 10% to 80% Relative Humidity, non-condensing
Best Print Quality: 30% to 60% Relative Humidity, non-condensing
Non-operating: 10% to 90% Relative Humidity, non-condensing

Altitude
Operating: 0 to 2,500 m (8,000 ft.).
Non-operating: 0 to 4000 m (13,125 ft.)

Primary voltage ranges
91 - 128 VAC, 110 VAC nominal
174 - 250 VAC, 220 VAC nominal

Frequency range
47 to 63 Hz

Primary fusing
110 VAC, 10 Amps and 6.3 Amps
220 VAC, 8 Amps and 6.3 Amps
(Not user-accessible)

Power Consumption
Meets Energy Star power conservation requirements.

State Average power
Continuous printing

208 W

Idle

130 W

Energy Star

45 W or under

Dimensions of standard unit (without Lower Tray Assembly)
Height: 463 mm (18.2 in.)
Depth: 492 mm (19.4 in.)
Width: 507 mm (20* in.)

*782 mm (30.8 in.) with the output tray

Dimensions with Lower Tray Assembly
Height: 678 mm (26.7 in.)
Depth: 492 mm (19.4 in.)
Width: 507 mm (20* in.)

*782 mm (30.8 in.) with the output tray

Weight of standard unit with all consumables (without Lower Tray Assembly) 47.5 kg (104.6 lbs.)

Weight of Lower Tray Assembly
14.3 kg (31.6 lbs.)

Printing speed
The speeds and rates listed in the following table represent the time it takes the printer to produce a print (1st print) and the rate at which the printer produces multiple prints (Continuous throughput rate). In both cases these are physical mechanism times, independent of image processing time. Actual time to first print depends on image complexity and size, resolution, and memory configuration.

Print mode Color Monochrome
1st
print
Continuous throughput rate (ppm)* 1st
print
Continuous throughput rate (ppm)*
Fast Monochrome

26 sec.**

14 **

26

14

Fast Color

40 sec.

4.7

55 sec.

4.7

Standard /
Presentation

43 sec.

3.5

26 sec.

14

Premium

1 min. 20 sec.

1.8

50 sec.

7

Transparency

1 min. 20 sec.

1.5

60 sec.

7

* Pages per minute.
** Output from Fast Monochrome will always be black-and-white.

Safety and emissions standards
FCC Part 15, Subpart J "Class B" verified
Vfg 243 Class B
CISPR 22 Class B, verified
UL 1950, listed.
CSA 220, certified.
EN60950/IEC 950, TUV licensed
EN55022

Support Home Page
Phaser 560 Support Page

Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program