Changes to Xerox parts are made to accommodate improved
components as they become available. It is important when ordering
parts to include the following information:
- Component's part number.
- Instrument type or number.
- Instrument serial number.
- Modification number, if any.
Using the Parts List
- The numbers shown in each illustration correspond to the parts
list number for that illustration.
- The capital letters “C”, “E”, and “S” shown
in an illustration stand for C-ring, E-ring, and Screw, respectively.
- A shaded triangle t in an illustration indicates the item is
part of an assembly.
- The notation “with X~Y” following an part name
indicates an assembly that is made up of components X through
Y. For example, “1 (with 2~4)” means part 1 consists
of part 2, part 3, and part 4.
- An asterisk * following a part name indicates the page contains
a note about this part.
- The notation “J1<>J2 and P2” is attached to a wire
harness. It indicates that connector jack 1 is attached to one
end of the wire harness and connector jack 2 is attached to the
other end that is plugged into plug 2.
- A notation “(part of item 1.1)” indicates that
the part is included with item 1.2.1 (PL1.2, line item 1).
|
PL 1.0 - Printer Cabinet
FRU's
| Fig 1 Parts |
Part Number |
Name and description |
| 1 |
802E33490 |
Top Cover |
| 2 |
802K24020 |
Right Side Cover |
| 3 |
802E34550 |
Multi-sheet Bypass Feeder Assembly Top Cover |
| 4 |
802K24030 |
Multi-sheet Bypass Feeder Assembly |
| 5 |
055K30000 |
Front Cover Inner Baffle |
| 6 |
802K24010 |
Front Cover Assembly |
| 7 |
802E33510 |
Left Side Cover |
| 8 |
802E33500 |
Rear Cover |
| 9 |
055K50620 |
Face Up Tray |
| 10 |
|
Label (part of Rear Cover) |
| S |
|
Screw (part of item Hardware Kit p.n. 600K89010) |
PL 2.0 - Top Cover
Assembly FRU's
| Fig 2 Parts |
Part Number |
Name and description |
| 1 |
802E33490 |
Top Cover |
| 2 |
140E45610 |
Toner Sensor Board |
| 3 |
|
Toner Sensor Actuator (part of Flag Kit, p.n. 600K88990)) |
| 4 |
056E04120 |
Control Panel Bezel (English) |
| |
056E04660 |
Control Panel Bezel (Icon) |
| 5 |
|
Control Panel Tape Harness (part of Harness Kit, p.n.
600K88980) |
| 6 |
101K42810 |
Control Panel Assembly |
| 7 |
|
Top Cover Latch Springs (part of item 10) |
| 8 |
|
Top Cover Latch (part of item 10) |
| 9 |
|
Top Cover Handle (part of item 10) |
| 10 |
600K88450 |
Top Cover Inner Frame Kit (includes items 7-9, 20,
21) |
| 11 |
022E24900 |
Eject Roller |
| 12 |
130K65650 |
Stack Full Sensor w/actuator |
| 13 |
038K13450 |
Eject Guide Assembly |
| 14 |
|
LED Harness C (part of Harness Kit, p.n. 600K88980) |
| 15 |
|
LED Harness M ((part of Harness Kit, p.n. 600K88980) |
| 16 |
|
LED Harness Y (part of Harness Kit, p.n. 600K88980) |
| 17 |
|
LED Harness K (part of Harness Kit, p.n. 600K88980) |
| 18 |
|
LED Assembly Spring (part of Hardware Kit, p.n. 600K89010) |
| 19 |
107K01920 |
LED Assembly |
| 20 |
|
Lower Eject Roller Bracket (part of item 10) |
| 21 |
|
Upper Eject Roller Bracket (part of item 10) |
| 22 |
|
26 Pin LED Connector (part of Harness Kit, p.n. 600K88980) |
PL 3.0 - Printer Chassis (1
of 2)
| Fig 3 Parts |
Part Number |
Name and description |
| 1 |
038K13460 |
Duplex Guide Assembly |
| 2 |
022E24940 |
Fuser Exit Roller |
| 3 |
009K01960 |
Right Top Cover Spring Assembly |
| 4 |
|
Fuser Drive Gear A (part of Gear Kit, p.n.
600K89000) |
| 5 |
|
Fuser Drive Gear B (part of Gear Kit, p.n.
600K89000) |
| 6 |
|
Fuser Drive Gear C (part of Gear Kit, p.n. 600K89000) |
| 7 |
|
Fuser Exit Roller Bushing (Right) (part of Hardware
Kit, p.n. 600K89010) |
| 8 |
115K01970 |
Drum Contact Assembly |
| 9 |
115E01970 |
Fuser Exit Roller Contact |
| 10 |
121K25800 |
Duplex Gate Solenoid Assembly |
| 11 |
022K78610 |
Registration Roller Assembly A |
| 12 |
007K11730 |
Registration Drive Gear A |
| 13 |
|
Registration Motor Ground Contact |
| 14 |
127K35200 |
Registration Motor Assembly |
| 15 |
121K25810 |
Registration Clutch |
| 16 |
|
A Registration Exit Sensor Actuator (part of Flag Kit,
p.n. 600K88990) |
| 17 |
|
A Registration Entrance Sensor Actuator (part of Flag
Kit, p.n. |
| |
|
600K88990) |
| 18 |
600K88480 |
Entrance Sensor Board w/harness |
| 19 |
022K78620 |
Registration Roller Assembly B |
| 20 |
|
B Registration Entrance Sensor Actuator (part of Flag
Kit, p.n. |
| |
|
600K88990) |
| 21 |
|
Waste Toner Sensor Actuator (part of Flag Kit, p.n.
600K88990) |
| 22 |
101K42820 |
Printer Unit Chassis |
| 23 |
130K65680 |
Color Registration Sensor Assembly |
| 24 |
127K35230 |
Main Cooling Fan |
| 25 |
|
Fuser Exit Roller Bushing (Left) (part of Hardware
Kit, p.n. 600K89010) |
| 26 |
009K01950 |
Left Top Cover Spring Assembly |
| 27 |
|
Fuser Latching Handle Spring (part of Hardware Kit,
p.n. 600K89010) |
| 28 |
003E55690 |
Fuser Latching Handle (Left) |
| 29 |
130K65670 |
Exit Sensor Assembly |
| 30 |
815E06790 |
Registration Shutter Plate |
| 31 |
121K26000 |
Registration Shutter Solenoid |
| 32 |
|
Shutter Spring (part of Hardware Kit, p.n. 600K89010) |
| 33 |
116-0992-00 |
Low-Voltage Power Supply Fan |
| S |
|
Screw (part of Hardware Kit, p.n. 600K89010) |
PL 4.0 - Printer Chassis
(2 of 2)
| Fig 4 Parts |
Part Number |
Name and description |
| 1 |
127K35180 |
Main Motor Assembly |
| 2 |
115K02020 |
Transfer Contact Assembly |
| 3 |
118E16970 |
Power Supply Insulation |
| 4 |
015K55950 |
Left Plate Assembly |
| 5 |
127K35190 |
Transfer Belt Motor Assembly |
| 6 |
|
Fuser Latching Handle Spring (part of Hardware
Kit, p.n. 600K89010) |
| 7 |
003E55700 |
Fuser Latching Handle (Right) |
| 8 |
127K35170 |
Main Feeder Drive Motor |
| 9 |
|
Gear H1(part of Gear Kit, p.n. 600K89000) |
| 10 |
|
Gear H2 (part of Gear Kit, p.n. 600K89000) |
| 11 |
|
Lower Plate |
| 12 |
116-1058-00 |
High-Voltage Power Supply Fan |
| S |
|
Screw (part of Hardware Kit, p.n. 600K89010) |
PL 5.0 - Paper Tray
FRU's
| Fig 5 Parts |
Part Number |
Name and description |
| 1 |
032K03330 |
Paper Tray Cassette |
| 2 |
017E09930 |
Retard Pad and Springs Kit |
PL 6.0 - Paper Tray
Guide FRU's
| Fig 6 Parts |
Part Numbers |
Name and description |
| 1 |
032K03330 |
Paper Tray 1 Right Guide Assembly
(includes items 2-10, 15, 20) |
| 2 |
017E09930 |
Foot |
| 3 |
|
Paper Tray Lift Arm (Right)
(part of item 1 and 18) |
| 4 |
|
Plastic Roller (part of Hardware
Kit, p.n. 600K89010) |
| 5 |
|
Paper Tray Lift Spring (part
of item 1 & part of item 18) |
| 6 |
120E20420 |
Paper Size Actuator |
| 7 |
140E45620 |
Paper SIze Sensing Board w/Harness |
| 8 |
|
Paper Tray Lift Arm (Right)
(part of item 1 and 18) |
| 9 |
|
Paper Tray Lock Spring (part
of item 1 & part of item 18) |
| 10 |
|
Plastic Slide (part of item
1 and 18) |
| 11 |
022K78600 |
Main Feeder Assembly |
| 12 |
|
Feed Roller (part of Paper
Feed Kit, p.n. 600K89320) |
| 13 |
|
Nudger Roller (part of Paper
Feed Kit, p.n. 600K89320) |
| 14 |
|
Main Feeder Drive Gear (part
of Gear Kit, p.n. 600K89000) |
| 15 |
|
Right Duplex Ground Contact
(part of item 1) |
| 16 |
|
Bottom Plate |
| 17 |
|
Left Duplex Ground Contact
(part of item 18) |
| 18 |
032K03320 |
Paper Tray 1 Left Guide Assembly
(includes items 2, 4, 5, 8-10, 17, 19) |
| 19 |
|
Paper Tray Lift Arm (Left)
(part of item 18) |
| 20 |
|
Duplex Connector (part of
item 1) |
| S |
|
Screw (part of Hardware Kit,
p.n. 600K89010) |
PL 7.0 - Mutli-sheet
Bypass Feeder FRU's
| Fig 7 Parts |
Part Number |
Name and description |
| 1 |
022K78630 |
Multi-sheet Bypass Feeder Assembly |
| 2 |
012E12690 |
Link |
| 3 |
007K11740 |
Multi-sheet Bypass Feeder Drive Gear |
| 4 |
802K24030 |
Multi-sheet Bypass Feeder Cover Assembly |
| 5 |
|
Multi-sheet Bypass OHP Sensor (part of
item 1) |
| 6 |
|
Multi-sheet Bypass Tray Empty Sensor (part
of item 1) |
| S |
|
Screw (part of Hardware Kit, p.n. 600K89010)) |
PL 8.0 - Electrical
Component FRU's
| Fig 8 Parts |
Part Number |
Name and description |
| 1 |
105K25110 |
Low Voltage Power Supply (115V) |
| 105K25130 |
|
Low Voltage Power Supply (230V) |
| 2 |
105K25120 |
High Voltage Power Supply |
| 3 |
|
High Voltage Tape Harness (part Harness Kit, p.n. 600K88980)) |
| 4 |
127K35220 |
Electrical Chassis Cooling Fan |
| 5 |
140E45640 |
Print Engine Controller Board |
| 6 |
672-1595-00 |
System Controller Board (Image Processor Board) |
| 7 |
121K25530 |
Internal Hard Drive |
| 8 |
|
Shield Plate |
| 9 |
|
Right Shield Plate |
| 10 |
110K13470 |
Front Cover B Interlock Switch |
| 11 |
|
|
| 12 |
110K13450 |
Top Cover A Interlock Switch |
| 13 |
162K68220 |
Paper Tray 2 Connector with Harness |
| 14 |
098S04423 |
Token Ring Card |
| 15 |
537E61970 |
Print Engine Controller EEPROM |
| 16 |
156-4811-00
156-4780-10
156-4839-00 |
64-Mbyte RAM DIMM
128-Mbyte RAM DIMM
256-Mbyte RAM DIMM |
| S |
|
Screw (part of Hardware Kit, p.n. 600K89010) |
PL 9.0 - Duplexer
Unit FRU's
| Fig 8 Parts |
Part Number |
Name and description |
| 1 |
022K78640 |
Duplexer Transport Assembly |
PL 10.0 - Duplexer
Unit FRU's
| Fig 10 Parts |
Part Number |
Name and description |
| 1 |
140E46240 |
Feeder Control Board |
| 2 |
962K00700 |
Upper Connector w/harness |
| 3 |
962K00690 |
Lower Connector w/harness |
| 4 |
022K79500 |
Idler Roller Assembly |
| 5 |
127K40870 |
Feeder Motor |
| 6 |
121K26030 |
Feeder Clutch |
| 7 |
022K79510 |
Feeder Drive Assembly |
| 8 |
017E09930 |
Foot (4) |
| 9 |
120E20420 |
Paper Size Actuator |
| 10 |
140E45620 |
Paper Size Sensing Board
w/Harness |
| |
050K50630 |
Paper Tray Cassette |
| |
022K79600 |
Lower Tray Assembly (with
tray) |
Kits
| Part number
| Name / Parts Included
|
| 600K89010
| Hardware
Kit
|
| LED Assembly Spring Kit (2)
|
| Plastic Roller (2)
|
| Fuser Exit Roller Bushing (L) (1)
|
| Fuser Exit Roller Bushing (R) (1)
|
| Shutter Spring (1)
|
| Fuser Latch Handle Springs (2) |
| Screw T3x8 (10)
|
| Screw T3x10 (10)
|
| Screw T4x10 (10)
|
| Screw M2x8 (10)
|
| Screw M3x6 (10)
|
| Screw M3x8 (10)
|
| Screw M4x8 (10)
|
| Screw SP3x10 (10)
|
| Part
number
| Name / Parts Included
|
| 600K89000
| Gear Kit
|
| Main Feeder Drive Gear
|
| Gear H1
|
| Gear H2
|
| Fuser Drive Gear (A)
|
| Fuser Drive Gear (B)
|
| Fuser Drive Gear (C)
|
| Part
number
| Name / Parts Included
|
| 116-1036-00
| Flag Kit
|
| B Reg Entrance Sensor Actuator
|
| A Reg Entrance Sensor Actuator
|
| A Reg Exit Sensor Actuator
|
| Toner Sensor Actuator
|
061-4291-00
| Part
number
| Name / Parts Included
|
| 600K88980
| Harness Kit
|
| LED Harness M
|
| LED Harness C
|
| LED Harness Y
|
| LED Harness K
|
| Control Panel Tape Harness
|
| HV Tape Harness
|
| 26 pin LED connector
|
| Numerous other harnesses (cables) to be added soon.
|
Supplies
and Accessories
| Part number
| Name / Parts Included
|
| 008R12685
| Fuser (1235) (110 V)
|
| 008R12686
| Fuser (1235) (220 V)
|
| 006R90293
| Standard Toner Cartridge (Black) (1235)
|
| 006R90294
| Standard Toner Cartridge (Cyan) (1235)
|
| 006R90295
| Standard Toner Cartridge (Magenta) (1235)
|
| 006R90296
| Standard Toner Cartridge (Yellow) (1235)
|
| 006R90303
| Hi Capacity Toner Cartridge (Black) (1235)
|
| 006R90304
| Hi Capacity Toner Cartridge (Cyan) (1235)
|
| 006R90305
| Hi Capacity Toner Cartridge (Magenta) (1235)
|
| 006R90306
| Hi Capacity Toner Cartridge (Yellow) (1235)
|
| 013R90132
| Imaging Drum (Black) (1235)
|
| 013R90133
| Imaging Drum (Cyan) (1235)
|
| 013R90134
| Imaging Drum (Magenta) (1235)
|
| 013R90135
| Imaging Drum (Yellow) (1235)
|
| 016-1934-00
| Cyan/Magenta/Yellow Imaging Drum Rainbow Pack (1235)
|
| 001R00559
| Transfer Belt Unit (1235)
|
| 801K01300
| Drum/Toner Cartridge Basket
|
<< Back to Top of Page
<< Back to Phaser 1235
Support...
|
